خط لمینت و کوتینگHansa/Omar/Mathys -عرض 250 سانتیمتر-سال 2015

خط برش و وایندر Meridiana -عرض 220 سانتیمتر-سال1995/1998

دستگاه برش و ریوایندر MT -عرض 250 سانتیمتر-سال 2008

دستگاه برش و ریوایندر Edelmann -عرض 250 سانتیمتر-سال 1994

دستگاه  برش و ریوایندر Elletre -عرض 160سانتیمتر-سال 1999

دستگاه وایندر Meridiana -عرض 400 سانتیمتر-سال 2000

سیستم بچینگ Brosiomeccanica -سال 2001-عرض 360 سانتیمتر

دستگاه کلندر Olbrich -سال 2004- عرض 260 سانتیمتر

دستگاه خشک کن Fleissner-عرض 220 سانتیمتر-سال 1995

دستگا استنتر- آون Fleissner - عرض 230سانتیمتر- سال 2003

دستگا استنترسانتکس - عرض 250  سانتیمتر-سال 1996-گازی

دستگاه فولارد بتا - عرض260 سانتیمتر- سال 1995

دستگاه فولارد کوسترز- عرض400 سانتیمتر- سال 1995

دستگاه کاردینگ F.O.R-عرض 350 سانتیمتر-سال 1998

دستگاه کراس لپر 2N Tectex-عرض وردی 60 و خروجی 65 سانتیمتر-سال 2000

دستگاه کراس لپر Autefa -عرض وردی 250 و خروجی 300 سانتیمتر-سال 1996

خط پاک کننده مرطوب Protner/Synchropack-عرض 400 سانتیمتر -سال 2004

دستگاه بویلر بخار Thermax- ظرفیت 18500 لیتر -سال 1996

دستگاه کمپرسور Ingersoll-سال 1996-فشار 3 بار

مکان استقرار : خارج از ایران

جهت دریافت عکس و اطلاعات بیشتر تماس حاصل فرمایید.

ماشین آلات نساجی- دستگاه بی بافت 

 1 x Hansa/Omar/Mathys coating/lamination line

Type: latex carpet backing   Width: 2500mm   YOC: 2015  

Complete line for carpet backing with both standard SBR Latex-Lick roll application as well as Gel Foam Latex application possibilities, designed for special carpet, customer-oriented products for niche carpets and short production series.

Line is complete with all electrical cabinets and other relevant accessories installed in 2015 and very little used.

Overall technical information is; connected for 3 x 885 amps, 550 kW (of which infrared is 130 kW), max. speed 5 m/min, average weight of coating 400 - 600 grams

1 x Meridiana winding and slitting line

Width: 2200mm   YOC: 1995/1998 

consisting of:

- 01 x Meridiana SV 6560 surface unwinder, max dia 2000 mm, yoc: 1998

- 01 x Meridiana RT 3560 slitter/re-winder, two driven support rolls, one pressure roll with adjustable pressure, max speed 600 m/min, Max dia finished reel 1200 mm, min slitting distance 50 mm, 3 & 6 inch cores, 22 knives.

- 01 x Meridiana NV 12 unloading card, max dia 1200 mm, yoc: 1998.

1 x MT slitter/re-winder

Width: 2500mm   YOC: 2008  

01 x roller accumulator, yoc: 2008

01 x inline revolving turret winder, with accumulator, 5 shear cutting knives and trolley with up-ender.

1 x Edelmann slitter/re-winder

Type: 640.05.24   Width: 2500mm   YOC: 1994  

Max fabric width 2500 mm, cylinder width 2600mm, core size 76 mm. Winding diameter 400-1250 mm. Minimum slitting width 50 mm, including movable take-up table. 14 knives (shear cut principle) for longitudinal slitting with pneumatically expanding undercut shaft, speed 20 - 300 m/min, complete with inlet frame with deflection rollers, operating platform, automatic web tension control with measuring roller.

1 x Elletre slitter/re-winder

Type: R 120A   Width: 1600mm   YOC: 1999

Fully automatic slitter/rewinder including overhead telfer system, designed for TNT production (tension-nip-torque) throughout the whole process.

1 x Meridiana pope winder

Type: AR9035   Width: 4000mm   YOC: 2000  

horizontal winder, max winding speed 400 m/min, max dia of finished reel 3500 mm.

Complete with winding shaft and overhead crane.

Nonwoven unwinding, winding and slitting equipment:

1 x Brosiomeccanica take-up batching system (thick NW)

Type: BM143 / BM146   Width: 3600mm   YOC: 2001   EL: 380/3/50

Un-winder and re-winder for nonwovens. BM143 is an unwinder to be inserted in a nonwoven line - to be fed either by woven or non-woven rolls.

1 x Olbrich calender

Width: 2600mm   YOC: 1994  

horizontal 2-roll thermobonding, smoothing and embossing calender.

Max fabric width 2400 mm, max hydraulic pressure 20 tons, heated embossing roll - 450 mm dia, max speed 300 m/min.

1 x Fleissner through-air dryer

Type: 1/1414-2200   Width: 2200mm   YOC: 1995 

perforated width 2260 mm, speed max 500 m/min, oil heated, temp max 120 deg. C., complete with all accessories such as control panel and electrical cabinets.

1 x Fleissner oven/stenter

Width: 2300mm   YOC: 2003

single belt dryer for indirect heating

- 3 heating zones, each 3 meters long

- heating air nozzles from top and bottom

- fiber glass belt covered with Teflon

- max circulating temperature 175 C.

- water evaporation capacity up to 430 kg/h

- production capacity up to 500 kg/h depending on the web weight
 

1 x Santex oven/stenter

Type: Santatherm   Width: 2500mm   YOC: 1996   EL: 380/3/50

single burner - gas heated, cooling zone, glass fiber double compression belt, production capacity 100 - 4000 gsm, modified so that it's possible to compact 4000 gsm to 25 mm height. Inlet height 5-100 mm.

1 x Santex complete application line

Width: 1500mm   YOC: 1998 

complete line for powder lamination consisting of:

1 double unwinder, 1 powder dispensing unit, 1 infrared belt drier, lamination calender, cooling belt drier, slitting & winding unit.
 

1 x Beta padder

Type: D-FLC-3   Width: 2600mm   YOC: 1995  

Differentiated padder =  two machines in one, so each nip can work at any working pressure, independently from the other nip. Cylinder width 2600 mm - working width maximum 2500 mm, Working pressure = 12 ton max (for each nip), 3 cylinders - dia 270 mm, idle upper roll, central driven roll, lower idle roll, Machine max speed = 70 m/min, Double lifting trough, Entry device with two stainless steel rollers to adjust fabric tension, Synchronization by dancing roller, Front spreader roller in Ebonite (driven by 0.5hp motor), Rear spreader roller in Stainless steel (fixed)

 1 x Küsters padder

Type: 222.54-4000   Width: 4000mm   YOC: 1995 

2-cylinder impregnation padder, Küsters S-roll dia 320 mm with Blue Roll 83 degree Shore/hardness sleeve and main drive cylinder dia 470 mm with Ebonite 100 degree Shore/hardness sleeve, complete with control panel. Max pressure 50 N/mm, max speed 120 m/min, 18.5 kW.

1 x F.O.R. conventional nonwoven card

Type: Injection card   Width: 3500mm   YOC: 1998   EL: 380/3/50

complete with Trützschler MS191 feeder, LVSA 375 condenser and FBK 536 chute feed.

Max carding capacity about 950 kg/hr with coarse fiber and 550 kg/hr with fine fiber.

1 x 2N Tectex crosslapper

Type: CS-Mini   Ingoing width: 600mm   Outgoing width: 650mm   YOC: 2000  

with Schneider Telemacanique variable speed controllers for asynchronous motors, PLC.L689

1 x Autefa crosslapper

Type: Cross-liner CL 2003   Ingoing width: 2500mm   Outgoing width: 3000mm   YOC: 1996

speed up to 70 m/min, Profiling, including all control and electrical cabinets.
 

1 x Protner/Synchropack wet wipe line

Width: 400mm   YOC: 2004  

Wet wipe line for producing wipes in several sizes, consisting of:

Protner type: Multi-NW HOL - max inlet 400 mm - max dia 1500 mm, unwinding with tension control

Two (2) interchangeable longitudinal folding groups according to the type of folding to be obtained: Z, ZZ or V-folds. Semi-automatic unrolling station. Synchropack type 900 WP.
 

2 x Thermax Steam Boilers

Type: Shellmax SM50/10.54/3   YOC: 1996 

10.5 atm, 3.3 MW (5 tons steam per hour), 18500 liter, 195 deg C., working with gas and petrol.
 

1 x Ingersoll Rand Compressor

Type: CHX5-60H   YOC: 1996  

air flow 62 m3/min. 62, operating pressure 3 bar, temperature 35°C, motor 250 kW, 2975 rpm